Insignia Car Speaker NS 32E859A11 User Manual

Quick Setup Guide  
NS-RSW211 Rocketboost Wireless Subwoofer  
Connecting your subwoofer  
Setting up and using your subwoofer in wireless mode  
Congratulations on your purchase of a  
Connecting the power  
How does Rocketboost work?  
high-quality Insignia product. Your Wireless  
Subwoofer represents the state of the art in  
powered subwoofers and is designed for  
reliable and trouble-free performance. Use this  
guide for initial setup of your Wireless  
1 Plug the AC power cord into a 120 V wall outlet.  
2 Click the Power switch to the right to turn on the wireless subwoofer.  
The power indicator turns on.  
Rocketboost technology can connect all audio devices throughout your home to form a home audio  
network.  
Rocketboost products include “Senders,” which send or transmit audio streams, and “Receivers,” which  
receive the audio. This lets you listen to music from your Sender in other rooms using your Receiver.  
Deciding on wired or wireless mode  
Subwoofer. See your User Guide for more  
information on using your Wireless Subwoofer.  
This product can be used as a standard wired subwoofer or you can upgrade to wireless when the  
subwoofer is used with other Rocketboost products. For wired mode, see the next section below. If you  
want to setup the subwoofer in wireless mode, see that section in the next column. For more details on  
using wireless mode with other Rocketboost product, see your User Guide.  
For a wireless subwoofer application, the wireless subwoofer is a Rocketboost receiver. A Rocketboost  
sender device needs to be connected to your AV receiver or other audio source to send the subwoofer  
channel to the wireless subwoofer.  
Package contents  
NS-RSW211 Wireless Subwoofer  
User Guide  
Quick Setup Guide  
Example configuration  
Setting up your subwoofer for wireless operation depends on the audio product that you want to use your  
subwoofer with. For example, you can use the subwoofer with your AV receiver, a Rocketboost-compatible  
soundbar, or even directly with your Rocketboost compatible TV. For additional information on wireless  
setup for those products, see the user guides for those products.  
The example below shows a typical AV receiver, connected to an RF-RBUSB Rocketboost wireless sender,  
connected wirelessly to the subwoofer (this solution is compatible with most AV receivers):  
Setting up and using your subwoofer in wired mode  
Your subwoofer can be used as a standard wired subwoofer with most AV receivers.  
Connecting your subwoofer for wired mode  
1 Connect the subwoofer output of your receiver to the Aux input of the subwoofer using a subwoofer  
cable.  
Typical AV Receiver + RF-RBUSB Rocketboost wireless sender/receiver  
2 Make sure that the INPUT SELECT switch on the subwoofer is set to Aux (wired).  
Setting the low pass filter  
Connecting your subwoofer for wireless mode  
Setting the low pass filter lets you select the frequency range of the sound that your subwoofer will  
reproduce and amplify. Turning the knob counterclockwise to 80 Hz sets the subwoofer to reproduce  
frequencies lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to reproduce frequencies lower  
than 150 Hz. The best setting depends on the other speakers you are using with the subwoofer. If you are  
unsure of the best setting, set this at 150 Hz.  
IMPORTANT: Every Rocketboost network must contain one hub device, which helps devices join the  
network. The network can have only one hub, which you can enable using the hub switch on the back of all  
Rocketboost senders and wireless sender/receivers.  
The wireless subwoofer is a Rocketboost wireless receiver and is not a hub device. To add this wireless  
receiver to your Rocketboost network, you need to join it to your hub device. This section describes the  
joining process.  
Listening to music and setting the volume  
1 Turn on your subwoofer and audio source and play music or a movie that you can easily hear the bass  
sound on.  
2 Adjust the volume level on your wireless subwoofer by turning the volume knob clockwise or  
counterclockwise. The level should be set so that the bass volume level best matches the volume level  
of the rest of your audio system.  
Once you have set this volume level you can leave it at this setting. The subwoofer volume will then  
automatically adjust when you change the volume of your audio source.  
To establish communication:  
1 Press the Power button on the Rocketboost hub device to turn it on.  
2 Make sure that the INPUT SELECT switch on the subwoofer is set to Wireless.  
3 Make sure that the power switch on your subwoofer is turned on. If the power indicator is red (Standby  
mode), briefly press the CONNECT button to turn on your subwoofer (the power indicator turns blue).  
4 Press and hold the Power button on the Rocketboost hub device for more than three seconds to put it  
into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for  
30 seconds.  
 

Infinity GPS Receiver GPS MIC 1 User Manual
Kenmore Air Conditioner 580751515 User Manual
King Canada Drill KC 108C User Manual
KitchenAid Marine Sanitation System Fvsfga User Manual
KitchenAid Mixer 9708308B User Manual
KitchenAid Range KERS308X User Manual
Klipsch Speaker RT 10D User Manual
Kobe Range Hoods Ventilation Hood CX1836GS User Manual
Kodak DVD Player DVD7000 User Manual
Koss DVD Player KS5429 2 User Manual